Two-Dimensional MOF and COF Nanosheets: Synthesis and Applications in Electrochemistry

Metal–organic framework (MOF) and covalent organic framework (COF) nanosheets are a new type of two-dimensional (2D) materials with unique design principles and various synthesis methods. They are considered ideal electrochemical devices due to the ultrathin thickness, easily tunable molecular structure, large porosity and other unique properties. There are two common methods to synthesize 2D MOF/COF nanosheets: bottom-up and top-down. The top-down strategy mainly includes ultrasonic assisted exfoliation, electrochemical exfoliation and mechanical exfoliation. Another strategy mainly includes interface synthesis, modulation synthesis, surfactant-assisted synthesis. In this Review, the development of ultrathin 2D nanosheets in the field of electrochemistry (supercapacitors, batteries, oxygen reduction, and hydrogen evolution) is introduced, and their unique dimensional advantages are highlighted.     

ZrO2掺杂AZO防静电陶瓷的制备

以AZO陶瓷为基体,采用传统的固相烧结技术制备了ZrO2掺杂AZO防静电陶瓷,研究了不同烧结温度、ZrO2掺杂量对AZO陶瓷的表面电阻率、相对密度、维氏硬度的影响.通过XRD测定陶瓷的物相结构,SEM观察陶瓷的断面形貌,表面电阻测试仪测量陶瓷的表面电阻,维氏显微硬度仪测量陶瓷的维氏硬度,阿基米德排水法测量陶瓷密度等方法对ZrO2掺杂AZO陶瓷进行了分析表征.结果表明:当烧结温度为1450℃,ZrO2的掺杂量为1wt;时,其综合性能最佳.此时陶瓷表面电阻率为105Ω· cm,相对密度达97.61;,维氏硬度为357.5 HV0.3,已达到防静电陶瓷性能要求.     

n-In0.35Ga0.65N/p-Si异质结的制备及其电学性能研究

采用双光路双靶材脉冲激光沉积(PLD)系统在p-Si衬底上外延生长InGaN薄膜,研究了InGaN薄膜的显微组织结构和n-InGaN/p-Si异质结的电学性能。研究表明,InGaN薄膜为单晶结构,沿[0001]方向择优生长,薄膜表面光滑致密,In的原子含量为35%。霍尔(Hall)效应测试表明In_0.35Ga_0.65N薄膜呈n型半导体特性,具有高的载流子浓度和迁移率及低的电阻率。I-V曲线分析表明In_0.35Ga_0.65N/p-Si异质结具有良好的整流特性,在±4 V时的整流比为25,开路电压为1.32 V。In_0.35Ga_0.65N/p-Si异质结中存在热辅助载流子隧穿和复合隧穿两种电流传输机制。经拟合,得到异质结的反向饱和电流为1.05×10^-8 A,势垒高度为0.86 eV,理想因子为6.87。     

添加CaSO4·2H2O为晶种制备磷石膏半水硫酸钙晶须

以固体废弃物磷石膏为原料,在传统常压醇水热法的基础上添加CaSO₄·2H₂O为晶种制备半水硫酸钙晶须。采用单因素试验法探究了晶种含量、丙三醇含量和磷石膏质量分数对晶须结构和形貌的影响,确定晶须的最佳制备工艺条件。采用SEM和XRD对样品进行表征分析,实验结果表明:添加CaSO₄·2H₂O晶种制备晶须的长径比(49.29)比只添加丙三醇的样品的长径比(30.99)提高了近60%;当丙三醇与水的体积比(V)为1、晶种含量为1%、磷石膏质量分数为5%时制备的晶须的平均直径为0.65 μm,长径比达到了62.15,晶须的尺寸均匀。这说明添加1%CaSO₄·2H₂O晶种、V为1的丙三醇和质量分数为5%的磷石膏在常压下能制备出高长径比和尺寸均匀的半水硫酸钙晶须。     

Existence of positive solutions of mixed fractional integral boundary value problem with p(t)-Laplacian operator

Ricerche di Matematica - In this paper, we investigate a mixed fractional integral boundary value problem with p(t)-Laplacian operator. Firstly, we derive the Green function through the direct...     

Chemical Constituents of Corydalis saxicola

Chemistry of Natural Compounds -     

Experimental study on synchrotron radiation photoionization of secondary organic aerosol derived from styrene ozonolysis

Secondary organic aerosol (SOA) produced by ozonolysis of styrene and other alkene compounds is a major part of fine particles in urban atmospheres. The atmospheric ozonolysis process of styrene is simulated in a smog chamber, and the formed SOA particles are detected on-line by a synchronous radiation vacuum ultraviolet photoionization mass spectrometer (VUV-PIMS) in this study. Through molecular ion peaks in the photonionization mass spectra of SOA and the corresponding photoionization efficiency curve, combined with off-line measurement verification of ultraviolet visible and infrared absorption spectra, it is determined that formaldehyde, formic acid, benzene, phenol, benzaldehyde, and benzoic acid are the main constituents of styrene SOA. These provide new information for studying the atmospheric ozonolysis oxidation mechanism of styrene. VUV-PIMS can get over complicated sample preparation procedures, secondary pollution, and other shortcomings of the off-line method and is a useful instrument to measure constituents and unveil the formation process of SOA particles.     

木质素热解生物油组成成分与分子尺寸分布特性分析

选用脱碱木质素作为原料,以热裂解气质联用技术(Py-GC/MS)研究木质素在350～600℃下热解产物成分和含量,并利用Joback法、 Lijie法和Tahami法3种基团贡献法计算了生物油各组成成分的临界参数和动力学直径,对木质素热解油产物的分子动力学直径分布特性进行计算.结果显示,愈创木基结构、紫丁香基结构、苯酚类、邻苯二酚类和芳烃类等5种芳香族化合物是350～600℃下木质素热解生物油的主要组成成分,其中愈创木基结构化合物的平均峰面积百分比达到70.7%.随着反应温度从350提高到600℃,分子动力学直径在0.560～0.610 nm区间内的木质素热解油组分含量从14.6%增加至31.3%.木质素热解生物油主要产物的动力学直径在0.560～0.710nm,表明一些孔径尺寸在此范围内的分子筛如SSZ-20、 ZSM-5和Beta可作为木质素裂解制备高品质芳烃燃料的催化剂.     

Facile synthesis of ordered mesoporous molybdenum carbide electrocatalysts for high-performance hydrogen evolution reaction

In this study, a simple method was designed to prepare ordered mesoporous carbons embedded with molybdenum without any extreme conditions. We prepared three different ordered molybdenum carbide materials with mesoporous structures to explore the influence of the structure of molybdenum-based materials on the HER catalytic efficiency. The ordered mesoporous molybdenum carbide catalysts (CMK-3-MoCx, fCMK-3-MoCx, CMK-8-MoCx) were characterized by SEM, TEM, XRD, nitrogen adsorption-desorption and XPS. The HER is catalyzed efficiently on the three electrocatalysts, fCMK-3-MoCx shows the best HER electro-catalytic performance with a small onset potential of −0.06 V vs. RHE, a low tafel slope of 66 mV dec⁻¹ and a small over-potential value of 89 mV at 10 mA cm⁻². This excellent performance on HER is due to its high specific surface area and highly ordered mesoporous structure that resulted in excellent proton transport efficiency and high electron transfer rate. Our results provide a new research direction for the application of flat ordered mesoporous structures in catalysis.